Laguna Heatwave Raku Kiln A255655
Take her for a test drive... From 80° to 1,850°F in 15 minutes!
The Heat Wave Raku Kiln is lightweight and effective!
Heatwave Raku Kiln Features:
Firing Chamber is 18" H x 21" W
Made from Superwool 607 MAX Ceramic Fiber Blanket*.
Kiln comes complete with 2 handles for easy lifting.
Chamber of kiln is 21" in diameter and 18" in height. Using the firebox design described below, the top of your first shelf can be level with the base of the kiln.
Ships via LTL
Building a firebox for your Axner Heat Wave Raku KilnIt's as simple as stacking up some bricks. You may use insulated firebrick OR hard firebrick. You can stack them in several different ways. Here is how we did it as seen in the kiln photograph above...
This design uses 37 standard 9"x4.5"x2.5" firebrick. If you were ambitious, you could cut the bricks in arcs to create a circular firebox that more closely matches the shape of the kiln. Note the diamond figure in front of the burner port represents one of the posts that are placed under the bottom kiln shelf. The post is placed at an angle so that it acts as a target brick, splitting and deflecting the flames to spread more evenly into the kiln.
Take her for a test drive... From 80° to 1,850°F in 15 minutes!
The Heat Wave Raku Kiln is lightweight and effective!
Heatwave Raku Kiln Features:
Firing Chamber is 18" H x 21" W
Made from Superwool 607 MAX Ceramic Fiber Blanket*.
Kiln comes complete with 2 handles for easy lifting.
Chamber of kiln is 21" in diameter and 18" in height. Using the firebox design described below, the top of your first shelf can be level with the base of the kiln.
Ships via LTL
Building a firebox for your Axner Heat Wave Raku KilnIt's as simple as stacking up some bricks. You may use insulated firebrick OR hard firebrick. You can stack them in several different ways. Here is how we did it as seen in the kiln photograph above...
This design uses 37 standard 9"x4.5"x2.5" firebrick. If you were ambitious, you could cut the bricks in arcs to create a circular firebox that more closely matches the shape of the kiln. Note the diamond figure in front of the burner port represents one of the posts that are placed under the bottom kiln shelf. The post is placed at an angle so that it acts as a target brick, splitting and deflecting the flames to spread more evenly into the kiln.
Take her for a test drive... From 80° to 1,850°F in 15 minutes!
The Heat Wave Raku Kiln is lightweight and effective!
Heatwave Raku Kiln Features:
Firing Chamber is 18" H x 21" W
Made from Superwool 607 MAX Ceramic Fiber Blanket*.
Kiln comes complete with 2 handles for easy lifting.
Chamber of kiln is 21" in diameter and 18" in height. Using the firebox design described below, the top of your first shelf can be level with the base of the kiln.
Ships via LTL
Building a firebox for your Axner Heat Wave Raku KilnIt's as simple as stacking up some bricks. You may use insulated firebrick OR hard firebrick. You can stack them in several different ways. Here is how we did it as seen in the kiln photograph above...
This design uses 37 standard 9"x4.5"x2.5" firebrick. If you were ambitious, you could cut the bricks in arcs to create a circular firebox that more closely matches the shape of the kiln. Note the diamond figure in front of the burner port represents one of the posts that are placed under the bottom kiln shelf. The post is placed at an angle so that it acts as a target brick, splitting and deflecting the flames to spread more evenly into the kiln.
Heat protective, fireproof clothing is recommended for raku firing.
Please allow 8-12 weeks for delivery.
LE-201-RST & LE-201-RIN have the same recommended furniture package. This package Includes:
4 - 10.5" x 22" x 1" (1/2 decagon shelves),
18 - 2" Kiln posts,
6 - 4"post and
6 - 8" posts.
Models Available:
LE-201-RST | $2,200
LE-201-RIN | $2,945
LE-201-RSU | $3,595
Heat Wave | A255655 | $744.
*Crate Charge: $225